Pneumatic Combi Seal

K30 - Pneumatic Combi Seal

General Features
Technicial Specifications

KASTAŞ NO	d (f9)	D1 (± 0,1)	D2 (H10)	b	S1 (-0/+0,2)	r	c
K30-010	10	19	17	8.4	7.5	1,1	1.5
K30-012	12	24	22	9,5	8,5	1,1	1,5
K30-012/1	12	20	22	8.5	7.5	1.1	1.5
K30-014	14	26	24	9,5	8,5	1,1	1,5
K30-016	16	28	26	9,5	8,5	1,1	1,5
K30-018	18	28	26	8,5	7,5	1,1	1,5
K30-020	20	32	30	9,5	8,5	1,1	2
K30-022	22	34,5	32	9,5	8,5	1,4	2
K30-025	25	37,5	35	9,5	8,5	1,4	2
K30-030	30	42,5	40	9,5	8,5	1,4	2
K30-032	32	44,5	42	9,5	8,5	1,4	2
K30-035	35	47,5	45	9,5	8,5	1,4	2
K30-040	40	52,5	50	9,5	8,5	1,4	2
K30-045	45	57,5	55	9,5	8,5	1,4	2
K30-050	50	63,2	60	9,5	8,5	1,8	2

K30 is a single acting wiper seal combination which consists of a metal vulcanized with elastomeric nitrile rubber using special production methods.

PRODUCT ADVANTAGES
• Superior wiping effect
• Superior sealing effect
• Wide range of dimensions
• Able to work in hard conditions
• Good adjustment to temperature changes due to the metal ring

APPLICATION
Pneumatic cylinders.

MATERIAL		CODE
NBR	70 SHORE A	NB^₇₀₀₁
STEEL	ST37	FE^₉₉₀₁

OPERATING CONDITIONS

MEDIA

Prepared , dried and de-oiled compressed air

TEMPERATURE

-30°C +105°C

PRESSURE

≤16 Bar

SPEED

≤1.0 m/sn

Note: The above data are maximum values and cannot be used at the same time.

SURFACE ROUGHNESS	Rmax
Sliding Surface Ød	≤4 μm
Groove Base ØD2	≤10 μm
Groove FlanksS1	≤15 μm
INSTALLATION K30 wiper/seal is fitted into the housing by means of a circlip recess. The sealing part is pushed in and fixed by the circlip. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the sealing element must be oiled with system oil. NOTES For special applications that require high temperatures , K30 can be produced in FKM material.