K95

Piston Rod Seal
Piston Rod Seal
   KASTAŞ NO d(f7) dp(h11) Db(H11) D(H11) b B (-0/+0,2) n
 K95-003 3 7 5 6 3
 K95-004 4 10 4 4,5 3
 K95-005 5 12 5 6 3
 K95-006 6 12 4 4,5 3
 K95-006/1 6 15 5 6 4
 K95-006/3 6 16 6 7 4,5
 K95-007 7 15 5 6 4
 K95-007/1 7,94 12,7 3,5 4 2
 K95-008 8 14 4 4,5 3
 K95-008/1 8 14,2 3,5 4 3
 K95-008/2 8 16 3,5 4 4
 K95-008/3 8 16 4,2 4,7 4
 K95-008/4 8 12 4 4,5 2
 K95-010 10 14 2 2,5 2
 K95-010/1 10 16 4 4,5 3
 K95-010/3 10 18 5 6 4
 K95-010/4 10 22 6 7 5
 K95-010/5 10 19 3,5 4 4
 K95-010/6 10 20 3,5 4 4,5
 K95-010/7 10 23 4,5 5 5
 K95-012 12 18 4 4,5 3
 K95-012/1 12 20 5,5 6,5 4
 K95-012/3 12 22 5 6 4,5
 K95-012/4 12 24 6 7 5
 K95-012/5 12,5 23 3,5 4 4,5
 K95-012/6 12,5 20 4,5 5 4
 K95-012/7 12,5 20,3 3,5 4 4
 K95-014 14 20 4 4,5 3
 K95-014/1 14 20 4,8 5,3 3
 K95-014/2 14 25 3,5 4 4,5
 K95-015 15 22 4 4,5 3
 K95-015/1 15 24 7 8 4
 K95-015/2 15 25 6 7 4,5
 K95-016 16 22 4 4,5 3
 K95-016/1 16 22 6 7 3
 K95-016/2 16 25 5 6 4
 K95-016/3 16 26 5 6 4,5
 K95-018 18 26 4 4,5 4
 K95-018/1 18 24 4 4,5 3
 K95-018/2 18 25 4 4,5 3
 K95-020 20 28 4 4,5 4
 K95-020/1 20 28 8 9 4
 K95-020/3 20 30 8 9 4,5
 K95-020/5 20 35 10 11 5,5
 K95-020/6 20 32 7,5 8,5 5
 K95-022 22 30 6 7 4
 K95-022/1 22 35 7 8 5
 K95-022/2 22 32 5 6 4,5
 K95-022/3 22 28 5 6 3
 K95-024 24 30 5 6 3
 K95-024/1 24 32 4 4,5 4
 K95-024/2 24 34 5 6 4,5
 K95-025 25 33 7 8 4
 K95-025/1 25 40 6 7 5,5
 K95-027 27 36 6 7 4
 K95-028 28 38 5 6 4,5
 K95-028/2 28 52 10 11 7
 K95-029 29 35 6 7 3
 K95-030 30 40 9 10 4,5
 K95-030/1 30 45 10 11 5,5
 K95-030/2 30 55 12 13 7
 K95-032 32 42 8 9 4,5
 K95-032/1 32 40 7 8 4
 K95-032/2 32 48 8 9 5,5
 K95-032/3 32 40 4 4,5 4,5
 K95-033 33 42 7 8 4
 K95-035 35 45 5 6 4,5
 K95-035/1 35 45 6 7 4,5
 K95-035/2 35 42 5,3 6,3 4,5
 K95-040 40 50 5 6 4,5
 K95-040/1 40 60 10 11 7
 K95-040/2 40 48 8 9 4
 K95-046 46 70 12 13 7
 K95-048 48 60 6 7 5
 K95-048/1 48 60 7 8 5
 K95-050 50 80 15 16 8
 K95-050/1 50 75 12 13 7
 K95-055 55 70 10 11 5,5
 K95-058 58 70 6 7 5
 K95-060 60 100 20 21 10
 K95-061 61 73 6 7 5
 K95-062 62 86 12 13 7
 K95-064 64 80 8 9 5,5
 K95-072 72 84 8 9 5
 K95-072/1 72 84 6 7 5
 K95-072/2 72 82 5 6 4,5
 K95-075 75 100 12 13 7
 K95-075/1 75 90 7,5 8,5 5,5
 K95-080 80 100 10 11 7
 K95-082 82,55 95,25 9,52 10,52 5,5
 K95-130 130 150 10 11 7
 K95-135 135 150 10 11 5,5
 K95-220 220 250 15 16 7,5
 K95-230 230 270 20 21 10
 K95-290 290 330 20 21 10

K95 is a single acting piston - rod seal and designed to have symmetrical lips in order to be used both for rod and piston applications.

PRODUCT ADVANTAGES
• Superior static and dynamic sealing efect
• Wide range of dimensions
• Easy assembly into closed grooves
• Although designed for hydraulic cylinders , it is used in special pneumatic cylinders as well
• Simple groove design
• Economical sealing solution

APPLICATION
Fork-lift trucks , injection moulding machines , agricultural machinery , and standard cylinders.
MATERIAL   CODE
NBR 90 SHORE A NB9001
OPERATING CONDITIONS
MEDIUM Mineral oils(DIN 51524)  HFA and HFB HFC
TEMPERATURE -30°C +105°C +5°C +60°C -30°C +60°C
PRESSURE ≤150 Bar ≤150 Bar ≤150 Bar
SPEED ≤0.5 m/sn ≤0.5 m/sn ≤0.5 m/sn
Note: The above data are maximum values and cannot be used at the same time.

    

SURFACE ROUGHNESS Ra Rmax
Sliding Surface ØD-Ød ≤0.4 μm ≤3.2 μm
Groove Base ØDb-Ødp ≤1.6 μm ≤10 μm
Groove Flanks B ≤3.2 μm ≤16 μm
Note: It is recommended to have 50% to 90% of the working surface material contact area value.
 

INSTALLATION
Easily assembled into closed grooves according to the minimum diameter values that are given in the below table. Open grooves or special assembly tools should be used for the values that are outside this table. Before installation the sealing element must be oiled with system oil.
 
MINUMUM DIAMETER VALUES FOR CLOSED TYPE OF GROOVES
(D-d)/2 (mm) 4 5 6 7.7 10 12.5 15
dmin (mm) 25 30 40 50 80 100 105

NOTES
For special applications that require high temperatures , K95 can be produced in FKM material. The permissible sealing gap values of K95 piston - rod seal is given in the below table.
 
PERMISSIBLE SEALING GAP
   Smax (mm)
t=(D-d)/2 50 Bar 100 Bar 150 Bar
t≤5 0.40 0.20 0.10
t>5  0.45 0.25 0.15
Note: The largest sealing gap value occurring on the non-pressurized side of the seal does have a vital importance for the function of the seal and in this respect it is quite important to use the S value lower than the above indicated numbers.